|
|
Made to measure just about covers anything and everything you can think of made from wood, here are a few of the more specialist
things we have been asked to make,
they range from Swimming pool roller covers and Sauna's to Easy access picnic tables and Wooden Swimming pools,
Hardwood decking covers made from Iroko, a very versatile Hardwood from West Africa renowned for its durability outside and often
used as a cheaper option than Teak in boat building and repairs,
although the roller covers have a decretive look to them they are far from just there for looks, their construction is substantial enough
that they are often used as diving boards as well as a decking area extension to the pool surround.
External Sauna's made from Pressure treated timber in a flat roof garden shed style or as a log cabin built using double insulated construction, making the walls and roof over 165mm thick, just measure the thickness of the walls on your garden shed and you
will see just how heavy duty these sauna buildings are.
With over 30 years experience in manufacturing and fitting all types of wooden items and products there's not much we can't or haven't already been asked to make, build or fit, so what ever your requirements don't worry talk to us.
Internal Saunas are built to your requirements on site and normally take
2 - 3 days to complete, they can be made to suit your needs and the available
space.
Built mainly using European Whitewood or European Redwood imported direct from Sweden because of it's low moisture content,
Also available in Aspen which is a beautiful clean light coloured, close grained semi Hardwood that has little or no knots and is well worth the extra cost.
If you need a picnic table that will seat 8-10 people but can also quickly be converted to accommodate 2 wheelchairs as well as still
provide seating for 6-8 able-bodied, or a swimming pool that won't brake the bank to install, even some designer entrance gates that
remind you of a holiday you had in Timbuktu ! ...................let us know,
In most situations we will try to carry out a site visit to take as many measurements as possible before making and then fitting as required,
some times a site visit is not possible, in this case it will be necessary for you to provide as much information as possible about your requirements,
Don't worry, you don't need to provide a set of Architects drawings, just a rough sketch or photo with as many sizes as possible will be
great, remember the more information you give us the easier it is for us to make your gates and therefore the cheaper they are for you.
At the bottom of this page is a diagram and some notes to help you fill in the Enquiry page,
Notes to help you measure your gates
A = Overall opening size if new gate posts are required. (We will workout the correct size of posts for the style you choose.)
B = Distance between posts. (From the inside face of one post, to the inside face of the other post)
C = Distance from centre of gate hanging pin to centre of pin.
D = Distance from flat of bottom crook to flat of top crook.
E = Distance from ground to top flat of bottom crook.
F = Overall height of gate at post.
G= Overall height of gates at centre. (If different from F)
Hand made in the heart of Devon using materials from sustainable woodlands
Copyright © 2009 A&A Davis Carpenters & Joiners